Flow Meter Avery-Hardoll Single Capsule Meter Series BM 250 SIZE 2 1/2 inch (63mm)

SINGLE CAPSULE METER SERIES BM250(63mm) SIZE 2 1/2 Inch

DOWNLOAD KATALOG KAMI DISINI : Avery-Hardoll BM-Series-Bulkmete.pdf

Hubungi :

PT. HARAPAN UTAMA INDONESIA
Telp. (021) 62200523,62303292,62317837
harapanutamapower@gmail.com

Description

VISCOUS PRODUCTS
 Avery-Hardoll bulkmeters can be used on all petroleum products of all viscosities. However, there is an increase in pressure drop with more viscous fuels, which under normal circumstances will limit the maximum flow rate obtainable. It is recommended that the pressure drop through a bulkmeter should not exceed 15 psi (1 bar), above which the load on the bearings will start to cause wear. Consequently when using products with viscosities above 100 centistokes (at operating conditions), it is necessary to reduce the maximum permitted flow rate. As a guide, it is suggested that the pressure drop through the meter should not exceed 10 psi (0.7 bar) for continuous running at maximum speed or 15 psi (1 bar) for continuous running at half speed. The low pressure drop for the BM Series of Avery-Hardoll bulkmeters is displayed on the left.

Reviews

There are no reviews yet.

Be the first to review “Flow Meter Avery-Hardoll Single Capsule Meter Series BM 250 SIZE 2 1/2 inch (63mm)”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *